Hello dear Amigurumi KNITTING LOVERS
Today, we share one free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. Main crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi bunny, amigurumi clowns, amigurumi dolls, amigurumi unigurumi lambs, amigurumi dolls, amigurumi bees, amigurumi dinosaurs, amigurumi elephants, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Today’s daily new crochet pattern Amigurumi Cute Kids Free Crochet Pattern without amigurumi
I want to give you some information about this pattern;
Materials Instructions
• sock weight yarn in black, red, white, light
peach, brown for Tyler | Black, white, dark
blue, light peach, magenta, grey, light brown
for Josh
• 2.5mm crochet hook
• a pair of 10mm eyes for each doll
• fiberfill
• stitch markers
• pearl headed pins
• yarn needle
• 18 gauge wire
• wire cutter
• masking tape

Terminology [US]
magic ring
chain [ch]
single crochet [sc]
half double crochet [hdc]
increase [inc]
decrease [dec]
back loop only [BLO]
front post double crochet [fpdc]
back post double crochet [bpdc]
slip stitch [sl st]
skip
chainless foundation st
SIZE: 6 inch/15 cm when made with the
indicated yarn
LEG [make 2]
Rnd 1: With black yarn, 5 sc in a magic ring. [5]
Rnd 2: inc X 5. [10]
Join red yarn. Do not cut off black yarn.
Rnd 3: With red yarn, BLO sl st around. [10]
Fasten off red yarn and join black.
Rnd 4: BLO sl st around. [10]
Rnd 5: sc around. [10]
Join white yarn. Do not cut off black yarn.
Rnd 6: With white yarn, BLO sl st around. [10]
Rnd 7: With black yarn, BLO sl st around. [10]
Rnd 8: With white yarn, BLO sl st around. [10]
Fasten off white yarn.
Rnd 9: With black yarn, BLO sl st around. [10]
Rnd 10: BLO sc around. [10]
sc in the next 2 st and mark the last worked st.
Fasten off and weave in the yarn end.
Make the second leg but do not fasten off. We will
join the legs in the next round.
BODY
Rnd 1: With the hook still in the live stitch of the
second leg, ch 5. sc in the marked stitch of the first
leg; sc in the remaining 9 st of the leg. sc in each of
the next 5 ch. sc in all 10 st of the second leg. [25]
Rnd 2: sc in the loops of the next 5 ch, sc in the
remaining 25 stitches around both legs. [30]
Rnd 3: (sc 4, inc) X 6. [36]
Rnd 4: BLO sl st around. [36]
Rnd 5: BLO sc around. [36]
Rnd 6: (sc 5, inc) X 6. [42]
Rnd 7: sc around. [42]
Rnd 8: (sc 5, dec) X 6. [36]
Rnd 9: sc around. [36]
Rnd 10: (sc 4, dec) X 6. [30]
Rnd 11: sc around. [30]
Stuff the legs.
Rnd 12: (sc 3, dec) X 6. [24]
Rnd 13-15: sc around. [24]
Stuff the body.
Rnd 16: dec X 12. [12]
Join light peach yarn. Do not cut off black yarn.
Rnd 17: With light peach yarn, BLO sl st around. [12]
Rnd 18: BLO sc around. [12]
Fasten off light peach yarn.
Rnd 19: With black yarn, BLO sl st around. [12]
Rnd 20: BLO sc around. [12]
Rnd 21-27: sc around. [12]
To support the weight of the head, bend an eyelet
on a piece of wire that is a little longer than the
neck. Insert wire down the neck and stuff around
it [Image 1].
Rnd 28: dec X 6. [6]
Fasten off, leaving a tail for sewing.
Using your yarn needle, weave the yarn tail
through the front loop of each remaining stitch
and pull it tight, closing off the neck. Weave in the
yarn end.
ARM [make 2]
Rnd 1: With black yarn, 4 sc in a magic ring. [4]
Rnd 2: inc X 4. [8]
Rnd 3: (sc 3, inc) X 2. [10]
Rnd 4: sc around. [10]
Fasten off black yarn and join light peach.
Rnd 5: BLO sl st around. [10]
Rnd 6: BLO sc around. [10]
Rnd 7: (sc 3, dec) X 2. [8]
Rnd 8-13: sc around. [8]
Fasten off light peach yarn and join black.
Rnd 14: BLO sl st around. [8]
Rnd 15: BLO sc around. [8]
Rnd 16-17: sc around. [8]
Fasten off, leaving a long tail for sewing.
We will now insert wire and stuffing into the
arm. Measure the length of the first arm, then
the area above the chest where the wire will go
through the body and then the second arm; add
an additional inch / 2.5cm. This is the total length
of wire needed. With a wire cutter, bend one end
to make an eyelet. Wrap a small piece of masking
tape around the eyelet to prevent it from poking
through the stitches. Insert this end into the first
arm and stuff around it lightly.
Insert the other end of the wire into the area
where the arm will be placed [Image 2]. Push
the wire all the way through to the other side
where the second arm will be attached. Bend
the tip into an eyelet, secure with masking tape,
insert it into the second arm and stuff lightly.
Hold the arms in place with pearl headed pins
and sew in place [Image 3]. Hold the top of the
arms with your thumb and index finger and bend
them downwards.
HEAD
Rnd 1: With brown yarn, 8 sc in a magic ring. [8]
Rnd 2: inc X 8. [16]
Rnd 3: (sc, inc) X 8. [24]
Rnd 4: (sc 2, inc) X 8. [32]
Rnd 5: (sc 3, inc) X 8. [40]
Rnd 6: (sc 4, inc) X 8. [48]
Rnd 7: (sc 5, inc) X 8. [56]
Join light peach yarn and fasten off brown.
Rnd 8-19: sc around. [56]
Rnd 20: (sc 5, dec) X 8. [48]
Rnd 21: (sc 4, dec) X 8. [40]
Rnd 22: (sc 3, dec) X 8. [32]
Fasten off light peach yarn and join black.
Rnd 23: (sc 2, dec) X 8. [24]
Insert 10mm safety eyes between Rnd 17 & 18
10 stitches apart.
Rnd 24: dec X 12. [12]
Stuff the head, leaving space for neck insertion.
Insert neck in the neck opening to check if it
fits. If the neck opening is larger than the neck,
continue to Rnd 25. Otherwise, skip Round 25.
Rnd 25: (sc 4, dec) X 2. [10]
Fasten off and weave in the yarn end.
EMBELLISH EYES
Thread a yarn needle with white yarn and
embroider a curve along the outer corner of
the eyes. Next with brown yarn, sew a line
stretching from the top inner corner of the eye
to the outer corner.
EYEBROWS
Thread a yarn needle with brown yarn. Insert
needle from the neck opening, bring it out from
Point A and back into the head from Point B
[Image 9]. Push the needle out from Point C* and
in from Point D [Image 10], and finally out from
the neck opening. Knot the yarn ends a couple of
times to secure. Clip off excess yarn and push the
knot back inside the head.
*When you bring out the needle from Point C,
make sure the exit point of the needle is slightly
above the first horizontal line [between Point A
and B], with the needle pushing this line upwards.
Doing so will create an arch.
NOSE
Sew three straight horizontal lines across 4 sts
between Rnd 15 & 16.
HAT
Rnd 1: With red yarn, ch 9. Starting from the
second ch from the hook, sc in the next 7 ch, inc
in the last ch. Working on the opposite side of the
foundation ch, sc in the next 7 ch. [16]
Rnd 2: (sc, inc) X 8. [24]
Rnd 3: (sc 2, inc) X 8. [32]
Rnd 4: sc around. [32]
Rnd 5: (sc 3, inc) X 8. [40]
Rnd 6: sc around. [40]
Rnd 7: (sc 4, inc) X 8. [48]
Rnd 8: (sc 5, inc) X 8. [56]
Rnd 9-16: sc around. [56]
Rnd 17: sl st in the next st, ch 3, fpdc in the next
st, (bpdc in the next st, fpdc in the next st) X 27; sl
st in the first st to join. [56]
Fasten off; weave in the yarn ends.

HAIR
Slip hat on the head and mark the area falling
outside the hat with pearl headed pins [Image
11]. The area falling outside this ‘line’ (towards
the face and not the scalp area) is where you
will be embroidering hair [Image 12]. Since the
hat will be covering most of the head, you don’t
need to embroider hair inside of this line. Take
the hat off.
Thread a yarn needle with brown yarn. Insert
needle from the neck opening (leaving a small
length of tail behind) and bring it out a little above
the pin on the right side of the face. From here
on, make slanting lines of varying lengths until
you cover the left side of the head [Image 13-18].
Repeat this on the right side of the head [Image
19]. Continue embroidering hair strands on the
sides of the face and also on the back of the head.
After you embroider the last ‘strand’ of hair,
insert needle in and bring it out from the neck
opening. Tie yarn tails together to secure. Cut off
excess yarn.
JOIN HEAD
Thread yarn needle with black yarn. Insert the
needle from the top of the head and bring it
out from the neck opening. Now insert needle
through the neck at Rnd 26, back through the
neck opening on the head, and out from the top
of the head (make sure the entry and exit space
is the same) [Image 20]. Slide the head down the
two strands of yarn until it sits perfectly around
the neck. Knot the yarn ends together a few timesto secure. Clip off excess yarn and carefully push
remaining yarn back into the head. Slip hat on
head and sew on head with red yarn.
BACKPACK
Rnd 1: With red yarn, ch 22. inc in the second
ch from the hook, sc in the next 19 ch, 4 sc in
the last ch. Working on the opposite side of the
foundation ch, sc in the next 19 ch, inc in the last
ch. [46]
Rnd 2: inc in the first 2 st, sc in the next 19 st, inc
in the next 4 st, sc in the next 19 st, inc in each of
the last 2 ch. [54]
Rnd 3: sc in the first 2 st, inc in the next 2 st, sc in
the next 19 st, inc in the next 2 st, sc in the next 4
st, increase in the next 2 st, sc in the next 19 st, inc
in the next 2 st, sc in the last 2 st. [62]
Fasten off.
From the last worked st, count counter clockwise
and mark the 14th st (A); skip the next 4 st and
mark the next st (B) [Image 21].
Go back to the last worked st. This time, count
clockwise from the st on the left of the last
worked st and mark the 14th st (C); skip the next 4
st and mark the next st (D).
Side Panel
Row 1: With red yarn, ch 29. Starting from the
second ch from the hook, sc 28, ch 1, turn. [28]
Row 2: sc 28, ch 1, turn. [28]
Row 3: sc 28.
Fasten off, leaving a long tail for sewing.
Hold one end of the panel against Point C of the
oval and sew from this point on all the way to
Point A [Image 22]. Sew the shorter side of the
panel to the 4-sc space between Point A & B.
Sew the panel and the oval from Point B all the
way to Point D [Image 23]. Stuff lightly and sew
the second short end of the panel to the space
between Point D & C.
Front Pocket
Row 1: With red yarn, ch 5. Starting from the
second ch from the hook, sc 4, ch 1, turn. [4]
Row 2-3: sc 4, ch 1, turn. [4]
Row 4: sc 4.
Fasten off, leaving a long tail for sewing.
Sew this piece to the front of the bag.
Straps
With white yarn, make 31 chainless foundation
stitches. Fasten off.
Pin the 16th st on the top center of the bag and
the each of the strap ends near the bottom of the
bag and sew in place
LEG [make 2]
Rnd 1: With black yarn, 5 sc in a magic ring. [5]
Rnd 2: inc X 5. [10]
Rnd 3-8: sc around. [10]
Mark the last worked st. Fasten off and weave in
the yarn end.
Make the second leg but do not fasten off. We will
join the legs in the next round.
BODY
Rnd 1: With the hook still in the live stitch of the
second leg, ch 5. sc in the marked stitch of the first
leg; sc in the remaining 9 st of the leg. sc in each of
the next 5 ch. sc in all 10 st of the second leg. [25]
Rnd 2: sc in the loops of the next 5 ch, sc in the
remaining 25 stitches around both legs. [30]
Rnd 3: (sc 4, inc) X 6. [36]
Join white yarn and fasten off black.
Rnd 4: BLO sl st around. [36]
Rnd 5: BLO sc around. [36]
Rnd 6: (sc 5, inc) X 6. [42]
Rnd 7: sc around. [42]
Rnd 8: (sc 5, dec) X 6. [36]
Rnd 9: sc around. [36]
Join dark blue yarn and fasten off white.
Rnd 10: (sc 4, dec) X 6. [30]
Rnd 11: sc around. [30]
Stuff the legs.
Rnd 12: (sc 3, dec) X 6. [24]
Rnd 13-15: sc around. [24]
Stuff the body.
Rnd 16: dec X 12. [12]
Join light peach yarn and fasten off black.
Rnd 17: With light peach yarn, BLO sl st around. [12]
Rnd 18: BLO sc around. [12]
Rnd 19-26: sc around. [12]
To support the weight of the head, bend an eyelet
on a piece of wire that is a little longer than the
neck. Insert wire down the neck and stuff around
it [Image 1].
Rnd 27: dec X 6. [6]
Fasten off, leaving a tail for sewing.
Using your yarn needle, weave the yarn tail
through the front loop of each remaining stitch
and pull it tight, closing off the neck. Weave in the
yarn end.
ARM [make 2]
Rnd 1: With light peach yarn, 4 sc in a magic
ring. [4]
Rnd 2: inc X 4. [8]
Rnd 3: (sc 3, inc) X 2. [10]
Rnd 4: sc around. [10]
Rnd 5-6: sc around. [10]
Rnd 7: (sc 3, dec) X 2. [8]
Rnd 8-13: sc around. [8]
Join dark blue yarn and fasten off light peach.
Rnd 14: BLO sl st around. [8]
Rnd 15: BLO sc around. [8]
Rnd 16-17: sc around. [8]
Fasten off, leaving a long tail for sewing.
We will now insert wire and stuffing into the
arm. Measure the length of the first arm, then
the area above the chest where the wire will go
through the body and then the second arm; add
an additional inch / 2.5cm. This is the total length
of wire needed. With a wire cutter, bend one end
to make an eyelet. Wrap a small piece of masking
tape around the eyelet to prevent it from poking through the stitches. Insert this end into the first
arm and stuff around it lightly.
Insert the other end of the wire into the area where
the arm will be placed [Image 2]. Push the wire
all the way through to the other side where the
second arm will be attached. Bend the tip into an
eyelet, secure with masking tape, insert it into the
second arm and stuff lightly. Hold the arms in place
with pearl headed pins and sew in place [Image
3]. Hold the top of the arms with your thumb and
index finger and bend them downwards.
Thread a yarn needle with white yarn and
embroider three rows of crosses (X) on the blue
section of the body
HEAD
Rnd 1: With magenta yarn, 8 sc in a magic ring. [8]
Rnd 2: inc X 8. [16]
Rnd 3: (sc, inc) X 8. [24]
Rnd 4: (sc 2, inc) X 8. [32]
Rnd 5: (sc 3, inc) X 8. [40]
Rnd 6: (sc 4, inc) X 8. [48]
Rnd 7: (sc 5, inc) X 8. [56]
Join light peach yarn and fasten off magenta.
Rnd 8-19: sc around. [56]
Rnd 20: (sc 5, dec) X 8. [48]
Rnd 21: (sc 4, dec) X 8. [40]
Rnd 22: (sc 3, dec) X 8. [32]
Rnd 23: (sc 2, dec) X 8. [24]
Insert 10mm safety eyes between Rnd 17 & 18, 10
stitches apart.
Rnd 24: dec X 12. [12]
Stuff the head, leaving space for neck insertion.
Insert neck in the neck opening to check if it fits. If
the neck opening is larger than the neck, continue
to Rnd 25. Otherwise, skip Round 25.
Rnd 25: (sc 4, dec) X 2. [10]
Fasten off and weave in the yarn end.
INDENT EYE
Mark the areas next to the eyes as shown in Image
- Thread a yarn needle with light peach yarn and
insert it from the neck opening, bringing it out
at the marked stitch on the top right [Image 5].
Push the needle back in from the stitch below to
it, bringing it out from the marked st on the left
parallel to it [Image 6]. Again, push the needle
back in from the marked stitch directly above
it and out from the neck opening [Image 7].
Pull both ends of the yarn tightly. Once you are
satisfied with the look, knot the yarn ends to
secure [Image 8]. Clip off excess yarn and push the
knot inside the head.
EMBELLISH EYES
Thread a yarn needle with white yarn and
embroider a curve along the outer corner of
the eyes. Next with light brown yarn, sew a line
stretching from the top inner corner of the eye to
the outer corner.
EYEBROWS
Thread a yarn needle with light brown yarn. Insert
needle from the neck opening, bring it out from
Point A and back into the head from Point B
[Image 9]. Push the needle out from Point C* and
in from Point D [Image 10], and finally out from
the neck opening. Knot the yarn ends a couple of
times to secure. Clip off excess yarn and push the
knot back inside the head.
*When you bring out the needle from Point C,
make sure the exit point of the needle is slightly above the first horizontal line [between Point A and
B], with the needle pushing this line upwards. Doing
so will create an arch.
NOSE
Sew three straight horizontal lines across 4 sts
between Rnd 15 & 16.
EAR [make 2]
Row 1: With light peach yarn, 4 sc in a magic ring, ch
1, turn. [4]
Row 2: inc, sc 2, inc. [6]
Fasten off, leaving a long tail for sewing. Align ears
with the eyes and sew in place.
HAT
With grey yarn, follow instructions for Head from Rnd
1-17.
Fasten off and weave in the yarn ends.
Beak
Row 1: ch 13 with black yarn. Starting from the second
ch from the hook, sc 8, ch 1, turn. [12]
Row 2: inc, sc 10, inc, ch 1, turn. [14]
Row 3: sc across, ch 1, turn. [14]
Row 4: inc, sc 12, inc, ch 1, turn. [16]
Row 5: sc across, ch 1, turn. [16]
Row 6: inc, sc 14, inc, ch 2, turn. [18]
Row 7: Starting from the third ch from the hook, hdc
in next 2 st, sc 14, hdc 2. [18]
Ch 2, sc 7 evenly along the edge, sc 12 along the
foundation ch, sc 7 along the other edge [Image 25].
Fasten off, leaving a long tail for sewing.
Hold the straight end of the beak against the hat and
sew them together [Image 26].
HAIR
Slip hat on the head and mark the area falling outside
the hat with pearl headed pins [Image 11]. The area
falling outside this ‘line’ (towards the face and not
the scalp area) is where you will be embroidering hair
[Image 12]. Since the hat will be covering most of the head, you don’t need to embroider hair inside of
this line. Take the hat off.
Thread a yarn needle with magenta yarn. Insert
needle from the neck opening (leaving a small
length of tail behind) and bring it out a little
above the pin on the right side of the face. From
here on, make slanting lines of varying lengths
until you cover the left side of the head [Image
13-18]. Repeat this on the right side of the head
[Image 19]. Continue embroidering hair strands
on the sides of the face and also on the lower
back of the head alternating between magenta
and black yarn.
After you embroider the last ‘strand’ of hair, insert
needle in and bring it out from the neck opening.
Tie yarn tails together to secure. Cut off excess yarn.
JOIN HEAD
Thread yarn needle with light peach yarn. Insert
the needle from the top of the head and bring it
out from the neck opening. Now insert needle
through the neck at Rnd 26, back through the
neck opening on the head, and out from the top
of the head (make sure the entry and exit space
is the same) [Image 20]. Slide the head down the
two strands of yarn until it sits perfectly around
the neck. Knot the yarn ends together a few times
to secure. Clip off excess yarn and carefully push
remaining yarn back into the head. Slip hat on
head and sew on head with grey yarn.
Congratulations!
You’ve just made your mini Twenty One Pilots.

