Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Don’t forget to subscribe to receive notifications of our new free recipes.

Today, the new daily crochet pattern Amigurumi Captain America ToyFree Crochet Pattern, I want to give you some information about this pattern;

Necessary materials
yarn Himalaya Dolfin Baby beige, blue, red
hook number 3 and white
eyes on 12mm safety mount
nose on a secure mount 10-12 mm
filler (holofiber, sintepuh
sewing needle and scissors
felt
glue moment “Crystal”
marker to highlight the beginning of the row
good mood

The size of the finished toy is 32-33 cm

Conventions
Magic ring – amigurumi ring
sc – single crochet
inc – increase
dec – decrease
hdc – double crochet
ch – air loop
pvrt – turn
c – blue
kr – red
b – white
sl-st – connecting post

Head (BEIGE)
We start knitting the head with composite
elements.

UNDERLIP

1. 6 sc in magic ring (6)
2. 6 inc (12)
3. (1 sc, inc) * 3 (9)
   Fold the piece in half, crochet
   for both sides 4 sc (4)
   Fasten the thread and cut.

EARS (2 parts)

1. 6 sc in magic ring (6)
2. 6 inc (12)
3. (1 sc, inc) * 6 (18)
   Fold piece in half, sew
   crochet for both sides 10 sc
   Thread fasten and cut

MAIN PART OF THE HEAD

1. 6 sc in magic ring (6)
2. 6 inc (12), if necessary, mark the beginning of the row
3. (1 sc, inc) * 6 (18)
4. 18 sc (18)
5. 15 sc, we knit the lower lip according to the scheme with three decreases (18)
6. 3 sc, 6 inc hdc, 15 sc (30)
7. 30sc (30)
8. (5 sc, inc) * 6 (36)
9. (6 sc, inc) * 6 (42)

10-13 (4 rows) 42 sc (42)

14. 4 sc, we knit the ear according to the same principle as the lower lip
    (6 sc), then we knit 5 sc and knit the second ear (6 sc),
    further 21 sc (42)
    At this stage, we insert the eyes in the 6th row, where we made increases
    half-columns with a crochet. We insert the nose at an equal distance
    from the eyes 4 rows below. We start making cuts.
15. (5 sc, dec) * 6 (36)
16. (4 sc, dec) * 6 (30)
17. (3 sc, dec) * 6 (24), fill
    sintepuh head
18. (2 sc, dec) * 6 (18)
19. (1 sc, dec) * 6 (12)
20. 6 dec (6)
21. dec. Fasten the thread, cut

MASK (in blue)

1. 6 sc in magic ring (6)
2. 6 inc (12)
3. 3 sc, ch 13, skip 2 sc, knit 1 sc in the 3rd loop, then
4. 3 sc, ch 13, skip 2 sc, 1 sc in the 3rd loop, then 1 sc (36)
5. (6 sc, inc) * 6 (42)
6. (7 sc, inc) * 6 (48)
7. 17 sc, 1 ch, pvrt
8. 31 sc, 1 ch, pvrt
   8-9 (2 rows) 31 sc (31)
9. 10 ch, skip 8 sc, knit 1 sc in the 9th loop, pvrt
10. 3 sc in a chain, 7 ch, sl-st.
    12.50 sc, ss. Thread fasten and cut

HANDLES (2 parts)

We start in red
6 sc in magic ring (6)
6 inc (12)
(1 sc, inc) * 6 (18)
4-5 (2 rows) 18 sc (18)

6. (1 sc, dec) * 6 (12)
7. 12 sc for the front wall (12)
8. 12 inc (24)
   Change color to blue
9. behind the front wall of the 7th row 12 sc (12)
   10-22 (13 rows) 12 sc (12)
   Fold the piece in half, crochet 6 sc. A thread
   cut

LEGS (2 parts)
We start knitting legs in red
7 ch, in the 2nd loop from the hook we do
increase, then 4 sc, in the last loop
we knit 3 rows, on the other side
we knit chains 2 sc, 2 inc (17)
1 sc, inc, 3 sc, (1 sc, inc)3, 2 sc, (1 sc, inc)3
(23)
behind the back wall 22 sc, inc (24)
4-5 (2 rows) 24 sc (24)
Move the marker to the middle of the heel,
this will be the beginning of the row.

6. 6 sc, 6 dec, 6 sc (18)
7. 5 sc, 4 dec, 5 sc (14),
   fill with sintepuh
   8-9 (2 rows) 14 sc (14)
8. behind the front wall
   (6 sc, inc) * 2 (16)
9. (1 sc, inc) * 8 (24).
   Thread fasten and cut
   BLUE:
10. behind the back wall of the 10th row 14 sc (14)
    13-21 (9 rows) 14 sc.
    Fill the leg with sintepuh, cut the thread.
    WE DO NOT CUT THE THREAD ON THE SECOND LEG, CONTINUE
    KNIT BODY

BODY (IN BLUE)

21. 4 sc on the same leg, 4 ch, connect 1 sb with the middle
    the second leg, as shown in the photo, then 14 sc along the leg, 4
    sc on the chain, 9 sc on the stem (36)
22. 36 sc
23. (5 sc, inc) * 6 (42)
24. (6 sc, inc) * 6 (48)
    25-26 (2 rows) 48 sc,

cut the blue thread, start knitting a red-white belt

27. knit 2 sc with a thread, then 2 sc with white, to the end of the row
    alternate 2 sc kr, 2 sc white. (48)
28. drawing of the previous row 48 sc

cut the red and white thread, then knit in blue

29. 48 sc
30. (6 sc, dec) * 6 (42)
31. 42 sc
32. (5 sc, dec) * 6 (36)
33. 36 sc
34. (4 sc, dec) * 6 (30)
35. 30 sc
36. (3 sc, dec) * 6 (24)
37. 24 sc
38. (10 sc, dec) * 2 (22)
39. (9 sc, dec)*2 (20)
40. In this row, we knit our hands in such a way that they
    were located parallel to the legs (see photo) (20 sc)
41. (8 sc, dec) * 2 (18), fill with sintepuh
42. (1 sc, dec) * 6 (12). We cut the thread

LOADING THE Muzzle

Inserting the needle from the back
heads and output at point A,
then we inject at point B and output it at the same point where it was initially injected.
We tighten the thread on the knot,
cut, hide.
The first tightening of the eyes is ready.
We take the thread, fold it in half and tie it around the nose in a strong knot. First end
knot with a needle we bring out at point E, the second – at point F.
We tie both ends into a knot, cut the thread,
hide.
We introduce the thread at point G, we output it at the extreme
the lower point of the right eye, then enter
needle at the lowest point of the left eye
and output at point G. Tighten, cut the thread,
hide. At the end of the tightening, sew the head to
body.

SHIELD
blue

6 sc in magic ring (6)
6 inc (12)
(1 sc, inc) * 6 (18)
Change to color red (2 sc, inc) * 6 (24)
(3 sc, inc) * 6 (30)
change to white (4 sc, inc) * 6 (36)
(5 sc, inc) * 6 (42)
change to red (6 sc, inc) * 6 (48)
48 sc for the back wall
(6 sc, dec) * 6 (42)
(5 sc, dec) * 6 (36)
(4 sc, dec) * 6 (30)
(3 sc, dec) * 6 (24)
(2 sc, dec) * 6 (18)
(2 sc, dec) * 6 (12)
(1 sc, dec) * 6 (6)
17.
In the 9th row, where knitted behind the back wall, attach a thread and
tie a chain of 17 loops, attach to the opposite
side 1 sc in the same row, knit 1 sc across the shield, then
17 sc in a chain, ss. Cut the thread, fasten, hide.
From felt cut out 2 stars and the letter A. Letter with glue
fasten on the mask, one star on the chest of the bear, the second – on
shield.

YOUR TOY IS READY!