Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi The Bunny Free Crochet Pattern, I want to give you some information about this pattern;
Materials and tools needed:
- basic yarn of any color, YarnArt Dolce, 1 skein
(hook of 4 mm); - additional yarn, Alize cotton gold or YarnArt
jeans (hook of 1.5 mm), 30 g of milky and a little
of soft pink (for the bow); - thin cotton yarn for eyes (black, white, grey and
matching to the basic color), just a little (hook of
1 mm); - pink and white felt;
- sewing thread of black and matching to the basic
yarn colors; - fabric glue;
- hooks of 1, 1.5 and 4 mm;
- a long needle and a wide-eyed needle;
- pink soft pastel for toning.
Abbreviations:
Ch – chain
Sc – single crochet;
Ss – slip stitch;
Inc – increase;
Dec – decrease;
MR – magic ring;
Body
- Make 2 ch, into the
2nd loop from the hook
crochet 6 sc, ss. - 6 inc (12);
- (1 sc, 1 inc)х6 (18);
- (2 sc, 1 inc)х6 (24);
- 24 sc ;
- (3 sc, 1 inc)х6 (30);
7-9. 30 sc ; - (3 sc, 1 dec)х6 (24);
- 24 sc ;
- (2 sc, 1 dec)х6 (18);
13-14. 18 sc ; - (4 sc, 1 dec)х3 (15);
Fasten off and cut the
thread, hide the tip.
Stuff the body firmly.
Legs
Make 4 ch, starting
from the 2nd loop
from the hook,
crochet:
- 1 inc, 1 sc, 2 inc
in 1 loop, 1 sc, 1 inc
(10); - 1 inc, 3 sc, 1 inc,
1 inc, 3 sc, 1 inc
(14);
3-4. 2 rows of 14 sc; - 3 sc, 4 dec, 3 sc
(10); - 4 sc, 1 dec, 4 sc
(9);
7-10. 4 rows of 9 sc;
Stuff the part. - (1 sc, 1 dec)х3
(6);
Tighten the hole.
Fasten off and cut
the thread, hide the
tip
Arms
- Make 2 ch, into
the 2nd loop from the
hook crochet 6 sc,
ss.
2-6. 6 sc ; - 5 sc, 1 inc (7);
- 6 sc, 1 inc (8);
9-10. 8 sc ; - (2 sc, 1 dec)х2
(6);
Stuff the part.
Tighten the hole.
Fasten off and cut
the thread, hide the
tip.
The places with
increases are elbows.
Correct the shape.
Head
(Alize cotton gold)
- 6 sc in the magic ring,
ss; - 6 inc (12);
- (1 sc, 1 inc)х6 (18);
- (2 sc, 1 inc)х6 (24);
- (3 sc, 1 inc)х6 (30);
- (4 sc, 1 inc)х6 (36);
- (5 sc, 1 inc)х6 (42);
- (6 sc, 1 inc)х6 (48);
- (7 sc, 1 inc)х6 (54);
- (8 sc, 1 inc)х6 (60);
- (9 sc, 1 inc)х6 (66);
12-21. 66 sc ; - (9 sc, 1 dec)х6 (60);
- (8 sc, 1 dec)х6 (54);
- (7 sc, 1 dec)х6 (48);
- (6 sc, 1 dec)х6 (42);
- (5 sc, 1 dec)х6(36);
- (4 sc, 1 dec)х6 (30);
Stuff the head firmly. - (3 sc, 1 dec)х6 (24);
- (2 sc, 1 dec)х6 (18);
- (1 sc, 1 dec)х6 (12);
- 6 dec.
Tighten the hole. Fasten
off and cut the thread,
hide the tip.
Hood
- Make 2 ch, into the
2nd loop from the hook
crochet 6 sc, ss. - 6 inc. (12);
- (1 sc, 1 inc)х6 (18);
- (2 sc, 1 inc)х6 (24);
- (3 sc, 1 inc)х6 (30);
- (4 sc, 1 inc)х6 (36);
7-12. 36 sc ; - (4 sc, 1 dec)х6
(30).
Fasten off and cut the
thread, hide the tip.
If the hood is too
small, add some more
rows with increases.
The result depends on
the density of the
crocheting.
Bunny’s ears
- Make 2 ch, into the
2nd loop from the hook
crochet 6 sc, ss. - 6 inc (12);
- (1 sc, 1 inc)х6 (18);
4-6. 18 sc ; - (4 sc, 1 dec)х3 (15);
- 15 sc ;
- (3 sc, 1 dec)х3 (12);
10-11. 12 sc ; - (2 sc, 1 dec)3 (9);
13-14. 9 sc ;
15.(1 sc, 1 dec)х3 (6); - 6 sc .
Fold the part and
crochet 3 sc for both
sides.
Fasten off and cut the
thread, hide the tip
Bunny’s tail
- Make 2 ch, into the
2nd loop from the hook
crochet 6 sc, ss. - 6 inc (12);
- 12 sc ;
- 6 dec, ss.
Fasten off and cut the
thread, hide the tip.
Stuff the part slightly.
Bow
Make a chain of 14
ch. Crochet 12 rows
of 14 sc, end with ss.
Fold the part and
crochet 7 sc for both
sides together. Repeat
it on the second side
of the bow.
Fold the bow accordion
and make a few
stitches in the middle
Middle part
Make a chain of 15
ch. Starting from
the 2nd loop from
the hook, crochet 14
sc. Fasten off.
Sew the sides of
the part together,
without grabbing the
loops of the bow.
You can also make a
bow tie, making the
middle part longer.
In this case the ends
of the part should be
sewn when the bow is
on the toy.
Assembly
Put the hood on the head. It must look nice
and neat. For the loops of the last row sew
the hood to the head with backstitches
Sew the head to the body. You will need thin
cotton yarn of matching color. Grab the loops of
the hood and of the head. To prevent the
wobbling of the head, stuff the neck firmly in
the process of sewing
Joining the arms
and legs
Pay attention to the
position of the
bunny’s legs. The
feet are apressed
to the body and
close to each other.
Make a knot on the
tip of the thread,
hide it inside the
leg and make a
couple of fastening
stitches (see the
photo).
Pierce the body,
bringing the thread
to the place where
the second leg will
be joined
Grab the loops of
the second leg
(without the
fastening stitches)
and pull the first
leg to the body.
Insert the needle in
the body 2 stitches
aside the output
point and pierce the
body.
Bring the thread 2
stitches aside the
inserting point. Pull
the second leg to
the body.
Repeat these steps
for 2 or 3 times.
Then bring the
thread under the
leg and fasten it
with a few knots.
Hide the tip inside
the body and cut
the thread.
Sew the hands in the same way. Pay attention
that the places with increases are elbows, and
they must be pointed backwards.
To avoid body deformation, do not tighten too
much when joining the parts.
Sew on the ears
and tail with a
strong thread.
Same as for the
arms and legs, make
a knot in the end of
the thread, hide it
inside the tail and
make one fastening
stitch.
Sew the tail round
to the body. The
ears should be
perpendicular to the
rows of the hood
Decoration
Pupils and irises
(thin cotton yarn)
Start with black.
- 6 sc in MR;
- 6 inc (12);
Change to grey. - (1 sc, 1 inc)х4, ss;
Fasten of and cut
the thread, hide the
tip.
Embroider the flares
with white.
Decoration
According to the pattern cut out the eyes and
nose. Scale the picture on your device up to the
desired size, put a sheet of paper to the screen
and contour the parts. Double the image on felt
and cut out the parts
The pupils can be either glued or sewn to the
felt. Iron the pupils before gluing to correct the
shape. I recommend to use transparent glue.
Warning! If you use some sort of glue for the
first time, try it on a needless piece of felt and
let it dry.
The glue should remain transparent; otherwise
you can spoil the toy.
Try the pupils on the felt. Apply the glue
pointwise on the wrong side of the pupil.
Carefully press them for a few seconds and let
dry
Using thin grey
cotton yarn, make
a contour for the
eyes and nose.
Apply the glue on
the edge of the
nose. Press the
thread to the nose
for a few seconds.
I use the pin to
keep my hands
clean.
In this way contour
the whole part. Cut
the needless
thread.
Contour upper parts of
the eyes in the same
way.
See the photo.
After making the
contour, try the nose.
It should be placed
right in the middle of
the face.
Mark the place where
the pointy tip of the
nose will be placed.
The mouth embroidery
should be started here.
Use thin grey cotton
yarn.
To make the mouth
neat, grab only thin
fibers of the thread
After the mouth is made, glue on the nose,
covering the beginning of the embroidery
Try the eyes on
the head as shown
on the photo.
Glue on the eyes.
Apply the glue
pointwise on the
contour of the
eyes.
Press for a few
seconds.
Be careful, try to
not glue your
hands.
Embroider the eyebrows and eyelashes. Tint the
cheeks with soft pastel or rouge
Sew on the bow. The bunny is ready
Cat’s ears
- Make 2 ch, into the
2nd loop from the hook
crochet 6 sc, ss; - 6 sc;
- (1 sc, 1 inc)x3 (9);
- 9 inc (18);
- (8 sc, 1 inc)x2 (20);
Fold the part and
crochet 10 sc for both
sides
Cat’s tail
- Make 2 ch, into the
2nd loop from the hook
crochet 6 sc, ss;
2-20. 6 sc, end with
ss.
Do not stuff the tail.
Fasten off and cut the
thread, hide the tip.
Sew the tail to the
body with a strong
thread of matching
color.
YOUR BUNNY IS READY!