Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi Sea Toys Animals Free Crochet Pattern, I want to give you some information about this pattern;
Marine life
Materials and tools:
yarn cotton or cotton / acrylic (used in the master class
yarn Vita Cotton Lira);
stuffing material (sintepuh);
eyes for toys (6 mm);
hook number 2, scissors, stuffing tweezers, needle, others
auxiliary tools
Legend:
ch – air loop
slst – connecting column
pp – lifting loop
sc – single crochet
hdc – double crochet
dc – double crochet
s2n – double crochet
approx. – increase
dec – decrease
Jellyfish
Bottom: in a spiral
1) 2 ch, 6 sc in the first loop (6)
2) appr.x6 for the rear half-loop (12)
3) (1, approx.) x6 for the back half-loop (18)
4) 1, approx., (2, approx.) x5, 1 (24)
5) (3, approx.) x6 (30), slst, cut the thread and
tuck under the loops through one column.
Attach the thread to the first half loop of the third row. Dial 21 ch, return 20 sl-st, go to the next half-loop with slst, dial 21 cc, return 20 slst. So knit everything 18 half loops in two rows. Cut the thread, pull out with hook on the wrong side of both ends and tie a knot.
Hat:
in a spiral (stuff in the process of stitching with the bottom)
1) 2 ch, 6 sc in the first loop (6)
2) approx.x6 (12)
3) (1, approx.) x6 (18)
4) 1, approx., (2, approx.) x5, 1 (24)
5) (3, approx.) x6 (30)
6) 2, approx., (4, approx.) x5, 2 (36)
7-11) 5 rows (36)
12) 2, dec., (4, dec.) x5, 2 (30), remove the hook from the loop, leave it like that.
Insert eyes into the hat between 10 and 11 rows at a distance
4 sc from each other.
We connect the hat and the bottom with wrong sides to each other. We return
hook into a loop and continue to knit single crochets, only now.
We connect both parts, passing the hook through two loops at once. When to the end
there will be about 10 columns left in the row, we fill the jellyfish, and then we finish
knit a row. Before closing the row, do not forget to add more stuffing, and after
closes – remember the toy a little to distribute the filler.
We knit the second row as follows way: skip one
loop, in the next we knit 5 dc, skip the loop, knit 1 sl-st. Further we continue to knit according to the scheme * 5 dc, skip sc, slst, skip sc* to the end of the row. But there is one moment – in the last pattern you need make a pass at 2 sc, since total number of stitches in a row multiple of four. After the last
we pull out the thread, do not tightening the knot, and through the next loop we restore the edge. Then
tighten the thread with a double knot and pull it into the fabric so that the knot hid among the posts.
Keith
1) 2 ch, 6 sc in the first loop (6)
2) approx.x6 (12)
3) (1, approx.) x6 (18)
4) 1, approx., (2, approx.) x5, 1 (24)
5) (3, approx.) x6 (30)
6) 2, approx., (4, approx.) x5, 2 (36)
7-16) 10 rows (36)
17) 8 sc, (dec., 4) x4, 4 sc (32)
18) 10 sc, dec., 8 sc, dec., 10 sc (30)
19) (3, dec.)x6 (24)
20) 5 sc, 14 sc for the back half loop, 5 sc (24)
The eyes are inserted between the 11th and 12th rows: the first – after 7 sc from
the beginning of the row, the second – after 17 sc from the first.
21) 1 row (24)
22) 5 sc, 14 sc for the front half loops of the 20th row, 5 sc (24)
23) (2, dec.)x6 (18)
24-25) 2 rows (18)
26) (1, dec.)x6 (12)
27) 1 row (12)
28) (2, dec.)x3 (9)
29) 1 row (9)
30) (1, dec.)x3 (6)
31) 2 sc, 1 sl-st for the body of the next
columns, ch 2, turn. Further
tie the tail in half according to the scheme:
1 dc, 1 s2n, 3 ch in pico, 1 s2n, 1
dc, 2 ch, 1 sl-st in the next st, 2 ch, 1 dc in the next st, 1
s2n, 3 ch in pico, 1 s2n, 1 dc, 2 ch, 1 sl-st, pull the thread, tie
knot and hide in the canvas.
Crab
Bottom:
1) 6 ch, 4 sc in the opposite direction, 3 sc in
extreme column, further on the other side
3 sc, approx. (12)
2) inc., 3 sc, inc.x3, 3 sc, inc.x2 (18)
3) 1 sc, approx., 4 sc, (approx., 1) x2,
appr., 4 sc, appr., 1 sc, appr. (24)
4) 1 sc, approx., 5 sc, (approx., 2) x2, approx.,
5 sc, appr., 2 sc, appr., 1 sc (30)
5) 2 sc, approx., 6 sc, (approx., 3) x2, approx.,
6 sc, appr., 3 sc, appr., 1 sc (36)
6) 3 sc, approx., 7 sc, (approx., 4) x2, approx., 7 sc, approx., 4 sc,
appr., 1 sc (42), ss, cut the thread and thread under the loops through one
column.
Pincers:
1) 2 ch, 4 sc in the first loop (4)
2) approx.x4 (8)
3) (1, approx.) x4 (12)
4) 1 row (12)
5) 5 sc, 4 dc with one vertex in
one loop, 6 sc (12)
6) dec.х6 (6)
7) 1 row (6), slst, knot, thread
cut.
Top part:
in a spiral (stuffed in the process of connecting to the bottom)
1) 6 ch, 4 sc in the opposite direction, 3 sc in the last column, then along
the other side 3 sc, approx. (12)
2) inc., 3 sc, inc.x3, 3 sc, inc.x2 (18)
3) 1 sc, approx., 4 sc, (approx., 1) x2, approx., 4 sc, approx., 1 sc, approx. (24)
4) 1 sc, approx., 5 sc, (approx., 2) x2, approx., 5 sc, approx., 2sc, appr., 1 sc (30)
5) 2 sc, approx., 6 sc, (approx., 3) x2, approx., 6 sc, approx., 3 sc, appr., 1 sc (36)
6) 3 sc, approx., 7 sc, (approx.,
4) x2, approx., 7 sc, approx., 4 sc, appr., 1 sc (42)
7-8) 2 rows (42)
9) knit a claw, 11 sc, knit second claw, sc to the end of the row
(42), pull the hook out of the loop, leave it like that.
The eyes are inserted between the 7th and 8th rows, the distance between them is 4 sc.
Fold the upper part with knitted claws and the bottom purl sides to each other, thread the hook into the left loop and, starting from the next loop, begin to tie according to the following scheme:
21 sc, *1 sc in the next stitch, 3 ch, 2 sl-st return, 1 sc in the same
loop * – 4 times, 9 sc, * 1 sc in the next loop, 3 ch, 2 sl-st return,
1 sc in the same st* – 4 times, then remove the hook from the loop.
Through the remaining hole we kill a crab. Not worth it pack too tightly a toy so that the stuffing does not start look between the columns.
Then insert the hook back into loop and knit the last four column. Don’t forget to add stuffing before the final row closure.
Then you should pull the thread without tightening the knot, and restore the edge
through the next loop, pull the thread from the bottom, tighten with a double
knot and stretch into the canvas so that the knot crawls between the posts.
Sea Horse
Torso:
in a spiral (stuff in the course of knitting)
1) 2 ch, 6 sc in the first loop (6)
2-9) 8 rows (6)
10) inc., 5 sc (7)
11) 1 sc, approx., 5 sc (8)
12) 2 sc, approx., 5 sc (9)
13) 1 row (9)
14) 3 sc, approx., 5 sc (10)
15) 4 sc, approx., 5 sc (11)
16) 5 sc, approx., 5 sc (12)
17) 2 sc, approx. x6, 4 sc (18)
18) 1 row (18)
19) 3 sc, (approx., 1) x6, 3 sc (24)
20-24) 5 rows (24)
25) 1 sc, dec., (2, dec) x5, 1 sc (18)
26) 1 row (18)
27) (1, dec.)x6 (12)
28) approx.x12 (24)
29) (3, appr.)x6 (30)
30) 2 sc, approx., (4, approx.) x5, 2 sc (36)
31-36) 6 rows (36)
Eyes are inserted between 32 and 33 rows,
the distance between the eyes is 18 sc.
37) 2 sc, dec., (4, dec) x5, 2 sc (30)
38) (3, dec.)x6 (24)
39) 1 sc, dec., (2, dec.) x5, 1 sc (18)
40) (1, dec.) x6 (12), sl-st, add stuffing to the head, hole
pull the front half loops, pass the needle again under
loops, tie the thread with a double knot and hide in the canvas.
Spout:
knit in a spiral (do not stuff)
1) 2 ch, 6 sc in the first loop (6)
2) 1 row behind the back half loop (6), slst, pull the thread without tightening
knot, cut off for sewing and fill, restoring the edge, through
next loop. Sew to the head exactly between the eyes.
On the new thread, tighten the knot and we introduce it into the tail so that the knot crawled into the canvas, as shown in the photo.
We bend the tip of the tail (the whole tail is added twice), we find comfortable position in which he to fit snugly, but at the same time remain place to roll it up again, and sew it with two or three stitches, then we move the needle higher, again find a convenient place for sewing, sew again with two or three stitches, tighten the thread with a double knot and hide into the canvas.
Fins:
4 ch, in the first loop: * 1 s2n, 3 ch in pico * – 3 times, 1 ss2n, 3 ch,
1 sl-st, on the other hand – 1 ch, 2 sc, 1 ch, 1 sl-st, pull the thread and
fill for sewing.
Fins are sewn on the sides two stitches, the thread should be pulled tight so that further it did not weaken and in the process of using the toy the fins have not begun to dangle.
Tie a double knot on the thread and hide in the canvas. Watch out so that the details are sewn symmetrical.
Head comb:
24 ch (leave long initial tail), 3 ch in pico, 1 sl-st, 1 sb, further knit 3 ch in pico, 1 slst, 1 sc – 12 times, in last element instead of knit the last sc, slst, pull the thread, do not tightening the knot.
First, insert the initial into the needle a thread. With it we sew a comb at base of the head. Two is enough stitches. Best for sewing on one column, but if it doesn’t work
Exactly, then maybe two. Then thread tie with a double knot and hide in canvas.
Then insert the main needle into the needle a thread. We introduce it into the same hole, where they hid the previous one, and translate slightly higher in the middle of the head, where then we will sew on the comb.
It is most convenient to withdraw the thread from holes, grab the comb by one or two threads and insert the needle into that same hole, then output above, and so along the entire sewing line.
To keep the comb from moving during sewing, you can pin it and on the forehead with a pin. Watch to he must have passed over the place head straps. Last stitch do it at the tip of the comb on the forehead and immediately tighten the double knot (enough one stitch), hide it at the same hole, cut off the excess thread.
Starfish
Core:
in a spiral (2 pcs.)
1) 2 ch, 5 sc in the first loop (5)
2) approx.x5 (10)
3) (1, approx.) x5 (15)
4) 1 sc, approx., (2, approx.) x4, 1 sc (20)
5) (3, approx.) x5 (25), slst, cut the thread
and thread through one loop.
Rays:
Attach the thread to the 25th loop of the last row.
1) 2 ch, 4 sc, 1 ch, turn
2) 4 sc, 1 ch, turn
3) dec.x2, ch 1, turn
4) 2 sc, 1 ch, turn
5) dec., knot, cut the thread.
We attach the thread to the next to the left of the first ray of the loop.
All beams must start at the last column of the increase and end in the first column next increase. Only 5 beams. Remaining from joining the thread refuel inside the columns the first row in the knitting process.
Cut off all single ponytails at the base, double ponytail
cut in half. We do not touch the tails on the tops.
Insert eyes, guided by the photo. Because the asterisk is pretty flat, the tips of the eye for toys should not be palpable from behind through the canvas, so you should cut them after pasting.
Fold both stars wrong sides to each other, attach the thread to the right of the first ray. tie everything
rays, connecting the halves of an asterisk into one toy, at the tops knit 4 sc in one loop. Hit when the last one is left.
untied ray, then tie a ray, add stuffing and tie to the end. Pull the thread without tightening the knot, cut
and restore the edge, then tighten with a double knot and hide in canvas.
FINISH
