Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi Clown Girl Free Crochet Pattern, I want to give you some information about this pattern;
Required:
- Yarn Lanoso Alara 50 g – 140 m cotton with acrylic (white, green, raspberry,
orange – 1 skein and a little pink and red and black for
face framing). - Hook No. 3, knitting needles No. 3.5 for hair and overalls.
- Ribbons in pink and green, buttons for the eyes, buttons in pink and
green color in the form of a flower, a thin elastic band for a cap - Filler – synthetic winterizer.
- Wire for arms and legs, double-sided tape, glue “Moment” colorless, dough for
modeling (from a set for children’s creativity), material for insoles (any plastic
capacity)
Abbreviations:
ch – air loop
sc – single crochet
Prib – increase (from 1 sc knit 2 sc)
Dec – decrease (out of 2 sc knit 1 sc)
Persons smooth surface – odd rows – facial loops, even rows – purl loops.
Persons p. – front loop
Out. p. – purl loop
Prib (when knitting) – knit 2 loops from one loop – one for the front
wall, the second behind the back wall of the loop.
Dec (when knitting) – knit two loops together with the front
2 together – knit 2 loops together
Krom.- edge loop
BODY:
Knit with white thread.
1st row: 2ch, 6 sc in 2nd st from hook (6)
2nd row: (inc) x 6 times (12)
3 row: (1 sc, prib) x 6 times (18)
4 row: (2 sc, prib) x 6 times (24)
5 row: (3 sc, prib) x 6 times (30)
6 row: (4 sc, prib) x 6 times (36)
7 row: (5 sc, prib) x 6 times (42)
8-15 row: 42 sc in a circle (42)
Take a piece of wire 40 cm long and insert between 7 and 8 rows (inner part 4 cm, leg length 12 cm, feet 6 cm). Wrap one leg with double sided tape as follows: cut off from the adhesive tape (I had an adhesive tape 3.5 cm wide) a strip of 1.5 cm, attach it along the wire, remove the top non-sticky strip and press the adhesive tape to the wire, etc. along the entire length of the leg.
Then wrap with white thread in 2 layers – from top to bottom and from bottom to top. Thread the thread inside body and wind from the inside. Do the same for the second leg.
16 row: (5 sc, dec) x 6 times (36)
17-19 row: 36 sc in a circle (36)
20 row: (4 sc, dec) x 6 times (30)
21-23 row: 30 sc in a circle (30)
Fill the lower part of the body with filler.
24 row: (3 sc, dec) x 6 times (24)
25-27 row: 24 sc in a circle (24)
28 row: (2 sc, dec) x 6 times (18)
29-31 row: 18 sc in a circle (18)
Fill the body with filler up to the 25th row.
Fasten the loop, cut the thread.
Take a piece of wire 30 cm long and insert between 26 and 27 rows (inner part
3cm, arm length 10.5cm, palm length 3cm). Make sure your feet and hands are on the same
level. Bend the ends of the wire to make palms.
Wrap one hand with double-sided tape, then with white thread in 2 layers – from top to bottom and
down up. Pass the thread inside the body and wind it from the inside. Do the same for the second
hand. So that the threads do not jump off the palms, you can slightly smear the ends of the palms
colorless glue “Moment”.
Stuff the upper body.
HEAD:
Knit with white thread.
In the course of knitting, fill with filler.
1st row: 2ch, 6 sc in 2nd st from hook (6)
2nd row: (inc) x 6 times (12)
3 row: (1 sc, prib) x 6 times (18)
4 row: (2 sc, prib) x 6 times (24)
5 row: (3 sc, prib) x 6 times (30)
6 row: (4 sc, prib) x 6 times (36)
7 row: (5 sc, prib) x 6 times (42)
8 row: 42 sc in a circle (42)
9 row: (6 sc, prib) x 6 times (48)
10-17 row: 48 sc in a circle (48)
18 row: (6 sc, dec) x 6 times (42)
19 row: 42 sc in a circle (42)
20 row: (5 sc, dec) x 6 times (36)
21 row: 36 sc in a circle (36)
22nd row: (4 sc, dec) x 6 times (30)
23rd row: (3 sc, dec) x 6 times (24)
24 row: (2 sc, dec) x 6 times (18)
Fasten the loop, leave the thread for stitching.
FACE SHAPING:
Cheeks (2 pieces):
Knit with pink yarn.
1st row: 2ch, 6 sc in 2nd st from hook (6)
2nd row: (inc) x 6 times (12)
3 row: (1 sc, prib) x 6 times (18)
Fasten the loop, leave the thread for sewing.
Nose:
Knit with red thread.
1st row: 2ch, 6 sc in 2nd st from hook (6)
2nd row: (inc) x 6 times (12)
3-5 row: 12 sc in a circle (12)
Fasten the loop, leave the thread for sewing.
Sew on buttons – eyes, embroider mouth with red thread, sew on nose and cheeks, embroider eyebrows with black thread.
Hairstyle:
Cast on 50 sts on orange needles and work in stockinette stitch.
canvas 15 cm high. Then steam this fabric with an iron and soak in an adhesive solution (1 tablespoon of PVA glue per glass of water), dry. Next, mark the area of the hair with pins. Dissolve the canvas in 1 row, cut the resulting spiral thread into 2 parts and attach to the head.
Sew the head to the body.
STOP FORMATION:
Bend the stop wire in half. Draw on paper the desired shape of the sole.
Cut out 2 insoles from a plastic container according to the drawn pattern. Glue
tape the foot to the insole. Before working with the dough, it is better to place the upper part
toys in a bag so as not to accidentally get dirty.
Form slippers from the dough of the shape you need. You can connect first
the sole of slippers (description below) and use it to navigate in the manufacture of insoles.
You need to wait a few hours for the dough to dry and harden.
The resulting small cracks in the dough can be filled with Moment glue.
SLIPPERS:
Knit with crimson yarn.
1 row: 13 ch, starting with 2 loops from the hook – 11 sc, 4 sc in the last loop,
on the reverse side of the chain – 10 sc, inc in the last loop.
2nd row: (inc.), 10 sc, (inc) x 4 times, 10 sc, (inc) x 2 times
3rd row: (inc.), 12 sc, (inc, 1 sc) x 4 times, 12 sc, (inc)
4 row: 40 sc in a circle (40)
5 row: 40 sc in a circle behind the back wall (40)
Change color to green.
6-8 row: 40 sc in a circle (40)
9 row: 14 sc, (dec), 2 sc, (dec) x 2 times, 2 sc, (dec), 14 sc (36)
10th row: 12 sc, (dec) x 6 times, 142 sc (30)
11 row: (dec), 9 sc, (dec), 4 sc, (dec), 9 sc, (dec) (26)
Put slippers on your foot and knit further.
12 row: (dec), 8 sc, (dec), 2 sc, (dec), 8 sc, (dec) (22)
Then make decreases until the stop from the dough closes.
Decorate slippers with pink and green ribbons.
OVERALLS:
Left leg: Cast on 10 sts with green thread.
1-2 row: 10 persons. expanse
3 row: (Prib) x 10 times (20)
4 row: 20 out
5 row: (inc, 1 persons) x 10 times (30)
6-14 row: 30 persons. expanse
15 row: (dec), 26 persons., (dec) – (28)
16 row: (dec), 24 persons., (dec) – (26)
17 row: (dec), 22 persons., (dec) – (24)
18 row: (dec), 20 persons., (dec) – (22)
Move the loops to the pin, cut the thread, leaving the end.
Knit the right leg in the same way with a raspberry-colored thread.
Transfer all loops to one knitting needle. Then continue to knit the left half
overalls with a green thread, and the right one with crimson.
19 – 34 row: 22 front surface of green color, 22 front surface of raspberry color (44)
35 row: 1 chrome, 7 knit, 5 loops close, 17 knit, 5 loops close, 6 knit, 1 chrome. (34)
36 row: 1 chrome, 7 out, dial 7 loops, 180 out, dial 7 loops, 7 out, 1 chrome. (48)
37-42 row: 48 persons. expanse
43 row: 1 chrome, (2tog, 1 yarn) x 11 times, 2 persons, (yarn, 2tog) x 11 times, 1 chrome (48)
44-46 row: 48 persons. expanse
Close all loops.
Steam off the jumpsuit. Sew on buttons in the form of a flower: pink – on green
side, green – on the raspberry side. Sew two sides down the center front
formation of the perineum. Run the seams on the legs, connecting the front and back.
Put a jumpsuit on the doll. Sew the details at the back in the center with a mattress seam.
Take a green ribbon and a pink ribbon and connect them together.
Pass the ribbon through the holes and tie a bow.
CAP:
We knit with a green thread.
1st row: 2ch, 6 sc in 2nd st from hook (6)
2 row: 6 sc in a circle (6)
3 row: (inc) x 6 times (12)
4-5 row: 12 sc in a circle (12)
6 row: (1 sc, prib) x 6 times (18)
7-8 row: 18 sc in a circle (18)
9 row: (2 sc, prib) x 6 times (24)
10-11 row: 24 sc in a circle (24)
12 row: (3 sc, prib) x 6 times (30)
13-14 row: 30 sc in a circle (30)
15 row: (4 sc, prib) x 6 times (36)
16-17 row: 36 sc in a circle (36)
18 row: (5 sc, prib) x 6 times (42)
19-20 row: 42 sc in a circle (42)
21 row: (6 sc, prib) x 6 times (48)
22-23 row: 48 sc in a circle (48)
24 row: (7 sc, prib) x 6 times (54)
25-26 row: 54 sc in a circle (54)
Pompon:
Make a pompom out of raspberry yarn. To do this, make 2 circles of cardboard
diameter 4.5 cm outer circle and 1 cm inner circle. Take a thread 2-3 meters long and
wrap circles. Cut the yarn by inserting scissors between the two circles. Pull the thread
between circles, pull tight and tie a few knots. The pompom is ready.
Attach the pom-pom to the hat.
Pass a thin elastic band from the sides of the cap, put the cap on the doll’s head and
adjust the length of the elastic.
FINISH
