Hello dear Amigurumi Knitting Lovers
Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Today, the new daily crochet pattern Amigurumi, Amigurumi Baby with Egg Free Crochet Pattern Crochet Pattern, I want to give you some information about this pattern;
Materials:
Threads for the body and for clothes – Semyonovskaya
100% acrylic, 438m| 100g –
color “heather”, golden, white.
hook No. 1 (gamma)
wire for the frame.
needle.
cilia.
filler
with my materials the child turned out to be tall
21cm (without hat with ears)
Legend:
sc – single crochet.
HDC – double crochet
approx. – from one column we knit two
dec. – knit 2 stitches together
pr4HDC – knit 4 stitches in one loop with
yarn over
4sc with one top – 4sc knitted together
We start from the head with flesh-colored threads
1st row – 6 sc in KA
2nd row – 6 approx. =12
Row 3 – (1sc, inc)x6 =18
Row 4 – (2sc, inc)x6 = 24
Row 5 – (3sc, inc)x6 = 30
Row 6 – (4sc,inc)x6 = 36
Row 7 – (5sc, inc)x6 = 42
8 row – (6 sc, inc)x6 =48
Row 9 – (7sc,inc)x6 = 54
Row 10 – (8sc, inc)x6=60
11-20 rows – 60
Row 21 – 20 sc, 8 inc, 4 sc (nose), 8 inc, 20 sc = 76
22-26 rows – 76 (at the end of the 26th row +1 offset loop)
Row 27 – 21sc, (1sc,dec)x5, 4sc, (dec,1sc)x5, 21sc = 66
28 row – 6sc,dec, (10sc,dec)x2, 3 inc (chin),
(dec,10sc)х2, dec,5sc =63
Row 29 – 5sc,dec, (9sc,dec)x2, 6sc, (dec,9sc)x2,dec,4sc =57
Row 30 – 4sc, dec, (7sc,dec)x2, 2sc, 3dec, 2sc, (dec,7sc)x2, dec,
3sc = 48
31st row – (6sc,dec)x6= 42
Row 32 – (5sc,dec)x6 = 36
Row 33 – (4sc,dec)x6 = 30
Row 34 – (3sc,dec)x6 = 24 (stuff)
Row 35 – (2 sc,dec)x6 = 18
Rows 36-38 – 18sc (neck) Cut the thread.
We do head tightening right away. Mark the middle of the nose with pins (21 rows). Stepping back from it to the right and left by 2 loops, we place pins – this is the inner corner of the eye. Stepping away from them another 5-6 stitches, we put the pins again – this is the outer corner of the eye. Now we move the nose pin one row down. The mouth is indicated approximately on the 25-26th row above the chin increases, the mouth is approximately 4 loops wide.
First we create a nose by placing several stitches on top of each other. (refer to the photo) Then we insert the needle into the open neck and bring it out in the place of the inner corner of the eye, retreat 5-6 loops (I have 6), insert the haze into the outer corner of the eye and bring it out into the open neck (where we started). We pull it in. We repeat the same with the 2nd eye. It should look like this:
Then we tighten our mouth. We insert the needle in the middle from the back of the head, approximately at the level of 11-12 rows, bring it out in the right corner of the mouth, retreat 4 loops to the left, insert the needle again and bring it out at the back of the head at the place of our start. We pull it in. We tie a double knot and hide it in the head…
Now we will emphasize the chin and create a beautiful arc of a closed eye. We insert the needle in the area of the 32nd row in the place shown in the photo and bring it out in the middle of the eye. We retreat 1 loop, insert the needle on the other side of the previous tightening of the eye (as if we were tracing a thread) and bring it out at the place of our “start”. We are pulling, but without fanaticism. We hide the ends of the thread inside. We repeat the same with the second half of the face.
We continue to knit the body with threads in the color of the overalls
Attach a colored thread and knit a row behind the p/p (for the p/p then
we will tie it with openwork “arches” (optional)
Row 39 – (inc, 1sc) x9 = 27
Row 40 – (inc, 2sc)x9 =36
41 row – 11sc, 3 inc, 15 sc, 3 inc, 4sc = 42 (make sure that
the increases were strictly on the sides, these are our hangers)
42nd row – 11sc, (1sc,inc)x3, 15 sc, (inc,1sc)x3.4 sc=48
43 row – 11sc, (2sc,inc)x3, 15 sc, (inc,2sc)x3.4sc =54
44 row – 11sc, (3sc,inc)x3, 15 sc, (inc,3sc)x3, 4 sc =6
Here, if desired, you can insert a wire into the head, which will pass through the entire body and bifurcate into legs. And we can do this at the end of knitting, when we knit the feet.
45-48 rows – 60
Row 49 – for salary (for salary then we will knit openwork
“arches”) 1sc, (approx, 3sc)x3, skip 15 loops, starting
from the 16th: 1sc, (approx, 1sc)x7, skip another 15 loops,
starting from 16th: 2sc = 40
50-53 rows -40 sc
54 row – (4sc,inc)x8 =48
Rows 55-58 – 48sc
59 row – (7sc,inc)x6 =54
60-63 rows – 54 sc
64 row – (8sc,inc)x6 = 60
65-69 rows – 60
70 row – (8sc,dec,10sc,dec,8sc)x2 = 56
71 row – 8sc.dec,8sc,dec,36sc = 54 Stuffed
For those who inserted the wire right away, divide it into two sides.
72nd row – 14sc, skip 27 loops, starting from the 28th: 13 sc=27
continue knitting the left leg
73-82 rows – 27sc
83 row- (7sc.dec)x3 = 24
84row – 24sc
85 row-(10sc,dec)x2 = 22
86 row – -(9sc,dec)x2 = 20
87 row – -(8sc,dec)x2 = 18
88 row – -(7sc,dec)x2 = 16
Rows 89-93 – 16sc Stuff.
forming the foot
94 row – 1sc, inc 4СН, 14sc = 19
95 row – 1 sc, (arrival 4 SSN) x 2.15 sc = 25
96 row – 5sc.dec.18sc = 24
97 row – 24 sc
Girls, if you haven’t inserted a wire frame into the head and body before, now is the time to do it. We “lay” the “passage” for the wire with a thick knitting needle through the leg-body-neck-head on one leg and through the leg-body on the other. On the foot I formed a loop along the length of the foot itself. For those whose child does not plan to sit cross-legged in the egg, it is not necessary to make a frame.
98 row – 2sc, (4sc with 1 vertex)x2, 4sc,(4sc with 1 vertex)x2,
2sc = 12
99 row – 6 dec = 6 fill the foot
Carefully sew up the hole behind the p/p, hide the thread.
Let’s move on to the right leg
We attach the thread to the 71st row in the place as shown in the photo
from 72 to 93 row we knit the same way as on the left leg
94row- 15sc, inc4HDC=19
95row-16sc, (arrival4СН)x2.1sc = 25
96 row – 19sc,dec.4sc = 24
97row – 24sc
98 row – (4sc, (4sc with one vertex)x2) x2 = 12
99 row – 6 dec = 6 Stuff the foot
carefully sew up the hole behind the p/p, hide the thread
Pens
attach a thread of the color of the clothing in the armpit area
left hand from the shelf side
1st row -(1sc,.inc.)x7.1sc =22
Having knitted a couple further
rows, insert
wire through both
hands..
Rows 2-16 – 22
Gradually add filler to the pen, but without
fanaticism (our pen should bend calmly.
switch to white thread (cuff)
17th row – for salary – 11dec = 11
Rows 18-19 – 11
switch to flesh-colored thread
For left hand:
20 row – for salary inc, 4 sc, inc, 5 sc = 13
For the right hand:
Row 20 – for salary inc, 5sc, inc, 4sc = 13
The following is the same for both handles:
21 row – 13
Row 22 – 8sc, ch 3, go down the chain – 2sc+1sc into the 8th loop,
continue along row 5sc =13
Row 23 – 7sc., skip a loop with a finger, 5sc = 12
Rows 24-26 – 12
Stuff the cuffs and the beginning of the wrist a little.
Row 27 – 1sc, dec, 4sc, dec, 3sc =10
28 row – 5 dec. Tighten, leaving a thread of 20-25 cm.. Palm at
We are not crowded. Then we form a cam out of it, securing
with a thread.
Decoration of the face For the eyelids we knit a chain of 6-7 ch. Glue the eyelashes to the chain. We try it on, choose the optimal position for the closed eyes and glue it on. We embroider eyebrows and hair… Where we embroider with a rococo stitch.
Bunny hat
Ears (2 pieces made of white thread, 2 pieces made of clothing-colored thread)
Dial 21v.p.
1st row – starting from the 2nd loop, knit 10 sc, 5 hdc, 4 hdc, 8 hdc to the last
loop; on the second side 4СН, 5ПСН, 10sc. = 46, v.p. turn
2nd row – 10sc, 9PSSN, 8prib PRSN, 9PSSN, 10sc = 54
Connect the white and colored parts and tie with colored thread:
22sc,10arrib sc,22sc. Finish. Fasten, hide the threads
Cap
We start from the back of the head. During the knitting process we must do
fitting, if necessary, we adjust the knitting.
We knit in turning rows, at the end of each row ch and turn
We dial 12v.p
1st row – starting from the 3rd loop, knit 9Dc, 8HDC in the last loop,
other side – 9HDC= 26
Row 2 – 5sc, 2hdc, 2dc, 8 incdc, 2dc, 2hdc, 2sc = 34
3rd row – 5sc, 3hdc, 3dc, (inc dc, 1dc)x3, (1dc, inc dc)x3, 3dc,
3PSN, 5sc =40
4th row – 5 sc, 4 PSN, 3 SSN, (inc SSN, 2 SSN)x5, inc SSN, 3 SSN, 4 PSN,
5sc =46
5th row – 5sc, 4hdc, 4dc, (inc dc, 3dc)x2, inc, 2sc, inc, (3dc, inc
SSN)x3, 4SSN, 4PSN, 5sc =52
6th row – 13PSN, inc PRSN, 4 PRSN, (inc SSN, 4SSN)x3, inc SSN, 4PSN,
prib PSSN, 13 PHDC=58
7th row – 14sc, inc PRSN, 3PSSN, 2SSN, inc SSN, 5SSN, inc SSN, 4SSN,
prib ssn, 5 ssn, prib ssn, 2 ssn, 3 ssn, prib ssn, 14sc = 64
8th row – behind p/p – 15 hdc, 34 dc, 15 pdc = 64
9-10 row – 15 hdc, 34 dc, 15 pdc = 64
In the next row we knit the ears
11th row – 15 hdc, 7 hdc, 6 hdc together with the ear, 8 hdc, 6 hdc along with the ear,
7СН, 15 ПHDC=64
12-15th row – 15 hdc, 34 dc, 15 pdc = 64
Without tearing off the thread, we tie the bottom of the cap with 2
turning rows with uniform decals, suitable
for the neck of your toy. (in the first row I have 4 decorative
the second – 3, but more is possible)
We switch to a white thread and continue knitting the main rows
hats
16th row – for p/pp-64sc
17th row – 64sc, then we knit 41 inch (tie for
hats), starting from the second, knit 40sc
Row 18 – 15sc, dec, 10sc, dec, 6sc, dec, 10sc, dec, 15sc; then we knit
41 inch (tie for a hat), starting from the second, knit 40sc.
We fasten the thread.
Egg (it is advisable to take a cotton thread so that the egg holds
form
1st row – 6 sc in KA
2nd row – 6 approx. =12
Row 3 – (1sc, inc)x6 =18
Row 4 – (2sc, inc)x6 = 24
Row 5 – (3sc, inc)x6 = 30
Row 6 – (4sc,inc)x6 = 36
Row 7 – (5sc, inc)x6 = 42
8 row – (6 sc, inc)x6 =48
Row 9 – (7sc,inc)x6 = 54
Row 10 – (8sc, inc)x6=60
11th row – (9sc.inc)x6 = 66
12-14 rows – 66
15th row – (10sc,inc)x6 = 72
16-17 rows – 72
18th row – (10sc.dec)x6 = 66
19-20 rows – 66
21st row – (9sc.dec)x6 = 60
22-23 row – 60
Row 24 – (sc, Dc, SS2H, Dc, sc, SS)x10
Row 25 – (2sc,(sc,Dc,sc – all in 1 loop), 2sc.ss)x10
Cut the thread and fasten.